The speed-independent load is granted by a high-end eddy current brake with computer-controlled torque measurement. This control, together with the ideal centrifugal mass dimensioning, results in a very pleasant pedalling feeling, allowing the patient to fully exploit his or her reserves. The mechanism, consisting of state-of-the art components, runs almost noiseless, even at high speed.
The infinitely variable seat offers an optimal sitting position for patients between 120 and 210 cm height. The handlebar can be adjusted. The easy passage between handlebar and seat is especially helpful for elderly and handicapped patients. The comfortable seat corresponds to the latest developments of touring saddles in the bicycle industry. It might be useful to install differently shaped saddles for different purposes (e.g. pulmonary function examinations with athletes, rehabilitation etc.) For this reason, the saddle pipe is equipped with a standardised saddle fixation to enable easy mounting of all commercially available saddle models. The stable steel-aluminium construction of the ergometer frame and the drive mechanism easily supports a weight of up to 160 kg.
The computer-controlled electronic high-end control centre is situated in the measuring head of the sana bike 320F. The measuring head’s front-side features the control elements and a backlit graphic high-resolution LCD display. Its side, containing the display, is usually oriented towards the person operating the device. This is why an LED speed display is mounted on the head’s upper side, clearly visibile for the patient. If the device is used in the rehabilitation or training sector, the measuring head can easily be turned around to allow view on the display and control unit.
|230-249V, 50 Hz or115V, 60 Hz
|RS-232 (galvanically isolated)
|Dimensions / basis
|43kg / 40 x 83 cm
|EC directive MDD 93/42/EEC, DIN VDE 0750-238
|Computer-controlled eddy current brakes with torque measurment, independent of revolutions per minute.
|1 until 400 Watt
|20 until 400 Watt
|Range of revolutions
|30 until 130 n/ min
|in accordance with DIN VDE 0750-238 (in revolution-independent region)
|Graphic LCD with 320 x 240 pixles, CCFT backlit for alphanumerical and graphical display of the ergometry parameters and of the user instructions as well as programming and service informations
|Infinitely variable for heights from 120 to 210 cm
|Adjustment of 360 degrees for optimal comport